• The surface to be painted must be undercoated with Decoprimer. Dilute Decoprimer with 25-30% of clean water by volume and apply to the surface as a single coat, using a roller.
• The complete drying time is 24 hours.
• Stir Beton Deco until it reaches a homogeneous consistency, using a mixing spatula. While still stirring the product, add clean water to reach the required consistency if it is needed.
• Apply to the surface in two coats.
• In the first coat application, slightly press the surface covered with Beton Deco, using a steel trowel to give the desired texture. Apply this process to the entire surface.
•  Once the product is relatively dry, spray some water to the surface and smooth the surface, using a Texturing Float.
• After 5-6 hours, apply the second coat.
• In the second coat application, apply a certain amount of product to the surface with the help of a spatula and create textures.
• After the product is slightly dry, spray some water to the surface and smooth the surface using a spatula.
• The complete drying time is 24-48 hours.
• Once Beton Deco is completely dry, apply the selected color using a roller and give the final look.
• The complete drying time is 48 hours.

• The touch dry time is 5 to 6 hours at +23°C / 73.4°F.
• The complete drying time is 24 to 48 hours at +23°C / 73.4°F.

Depending on the surface smoothness, its porosity, and the application methods, for a single coat application:

•  1 lt covers 2,25 – 2,85 m² of surface
•  1 kg covers 1,35 – 1,65 m² of surface
•  The paint consumption for 1 m² area is 350–440 ml and 600–750 gr.

• Surfaces to be painted must be free of dirt, dust, oil, scaling paint. After removing any kind of defect, the surface should be fixed with SAN DECO ACRYLIC PUTTY INTERIOR and undercoated with SAN DECO DECOPRIMER.
• It is recommended to use the same color primer with the selected color.